1-3
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 04h20m03s
Tag: 0
Destination: 127.0.0.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 04h20m03s
Tag: 0
Destination: 192.168.0.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 192.168.0.53 Interface: Vlan-interface1
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active Adv Age: 04h12m07s
Tag: 0
Destination: 192.168.0.53/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
NextHop: 127.0.0.1 Interface: InLoopBack0
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
State: Active NoAdv Age: 04h12m07s
Tag: 0
Displayed first are statistics for the whole routing table, followed by detailed description of each route (in
sequence).
Table 1-2 display ip routing-table verbose command output description
Field Description
Destination Destination address/mask length
Protocol Protocol that presents the route
Process ID Process ID
Preference Priority of the route
Cost Cost of the route
NextHop Address of the next hop on the route