H3C S5120-SI Series Command Reference

1-2
Reauth Period 3600 s
The maximal retransmitting times 3
The maximum 802.1X user resource number is 1024 per slot
Total current used 802.1X resource number is 1
GigabitGigabitEthernet1/0/0/1 is link-up
802.1X protocol is enabled
Handshake is disabled
Periodic reauthentication is disabled
The port is an authenticator
Authenticate Mode is Auto
Port Control Type is Mac-based
802.1X Multicast-trigger is enabled
Mandatory authentication domain: NOT configured
Guest VLAN: 4
Auth-fail VLAN: NOT configured
Max number of on-line users is 256
EAPOL Packet: Tx 1087, Rx 986
Sent EAP Request/Identity Packets : 943
EAP Request/Challenge Packets: 60
EAP Success Packets: 29, Fail Packets: 55
Received EAPOL Start Packets : 60
EAPOL LogOff Packets: 24
EAP Response/Identity Packets : 724
EAP Response/Challenge Packets: 54
Error Packets: 0
1. Authenticated user : MAC address: 0015-e9a6-7cfe
Controlled User(s) amount to 1
Table 1-1 display dot1x command output description
Field Description
Equipment 802.1X protocol is enabled Indicates whether 802.1X is enabled globally
CHAP authentication is enabled
Indicates whether CHAP authentication is
enabled
Transmit Period Setting of the username request timeout timer
Handshake Period Setting of the handshake timer
Reauth Period Setting of the periodic re-authentication timer
Quiet Period Setting of the quiet timer
Quiet Period Timer is disabled Indicates whether the quiet timer is enabled
Supp Timeout Setting of the client timeout timer
Server Timeout Setting of the server timeout timer

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English