H3C S5120-SI Series Command Reference

1-7
The Maximum Frame Length is 10240
Broadcast MAX-ratio: 100%
Unicast MAX-ratio: 100%
Multicast MAX-ratio: 100%
PVID: 1
Mdi type: auto
Port link-type: access
Tagged VLAN ID : none
Untagged VLAN ID : 1
Port priority: 0
Peak value of input: 0 bytes/sec, at 00-00-00 00:00:00
Peak value of output: 0 bytes/sec, at 00-00-00 00:00:00
Last 300 seconds input: 0 packets/sec 0 bytes/sec -%
Last 300 seconds output: 0 packets/sec 0 bytes/sec -%
Input (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts
Input (normal): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts
Input: 0 input errors, 0 runts, 0 giants, 0 throttles
0 CRC, 0 frame, 0 overruns, 0 aborts
0 ignored, 0 parity errors
Output (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output (normal): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output: 0 output errors, 0 underruns, 0 buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, 0 no carrier
Table 1-2 display interface command output description
Field Description
GigabitEthernet1/0/1 current state Current physical link state of the Ethernet port
IP Packet Frame Type Frame type of the Ethernet port
Description Description of the interface
Unknown-speed mode
Unknown-speed mode, in which mode speed is negotiated
between the current host and the peer.
unknown-duplex mode
Unknown-duplex mode, in which mode speed is negotiated
between the current host and the peer.
The Maximum Frame Length The maximum frame length allowed on an interface
Broadcast MAX-ratio
Broadcast storm suppression ratio (the maximum ratio of
allowed number of broadcast packets to overall traffic through
an interface)
Unicast MAX-ratio
Unicast storm suppression ratio (the maximum ratio of allowed
number of unknown unicast packets to overall traffic over an
interface)

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English