H3C S5120-SI Series Command Reference

1-8
Field Description
Multicast MAX-ratio
Multicast storm suppression ratio (the maximum ratio of
allowed number of multicast packets to overall traffic through an
interface)
PVID Default VLAN ID
Mdi type Cable type
Port link-type Interface link type, which could be access, trunk, and hybrid.
Tagged VLAN ID
VLANs whose packets are sent through the port with VLAN tag
kept
Untagged VLAN ID
VLANs whose packets are sent through the port with VLAN tag
stripped off
Peak value of input Peak value of inbound traffic, in bytes/sec.
Peak value of output Peak value of outbound traffic, in bytes/sec.
Last 300 seconds input: 0
packets/sec 0 bytes/sec
Last 300 seconds output: 0
packets/sec 0 bytes/sec
Average rate of input and output traffic in the last 300 seconds,
in pps and Bps
Input (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0
multicasts
Packet statistics on the inbound direction of the interface,
including the statistics of normal packets, and abnormal
packets, in packets and bytes
Number of unicast packets, broadcast packets, and multicast
packets on the inbound direction of the interface
Input (normal): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0
multicasts
Normal packet statistics on the inbound direction of the
interface, including the statistics of normal packets, in packets
and bytes
Number of unicast packets, broadcast packets, and multicast
packets on the inbound direction of the interface,
input errors Input packets with errors
runts
Frames received that were shorter than 64 bytes, yet in correct
formats, and contained valid CRCs
giants
Frames received that were longer than the maximum frame
length supported on the interface:
z For an Ethernet port that permits jumbo frames, giants refer
to frames that are longer than 10236 bytes (without VLAN
tags) or 10240 bytes (with VLAN tags).
z For an Ethernet port that forbids jumbo frames, giants refer
to frames that are longer than 1536 bytes (without VLAN
tags) or 1540 bytes (with VLAN tags).
throttles
The number of times the receiver on the interface was disabled,
possibly because of buffer or CPU overload
CRC
Total number of packets received that had a normal length, but
contained checksum errors
frame
Total number of frames that contained checksum errors and a
non-integer number of bytes
overruns
Number of times the receive rate of the interface exceeded the
capacity of the input queue, causing packets to be discarded

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English