H3C S5120-SI Series Command Reference

1-8
Description
Use the display rmon prialarm command to display the configuration of the specified or all private
alarm entries.
Related commands: rmon prialarm.
Examples
# Display the configuration of all private alarm entries.
<Sysname> display rmon prialarm
PrialarmEntry 1 owned by user1 is VALID.
Samples type : absolute
Variable formula : (.1.3.6.1.2.1.16.1.1.1.6.1*100/.1.3.6.1.2.1.16.1.1.1.5.1)
Description : ifUtilization.GigabitEthernet1/0/1
Sampling interval : 10(sec)
Rising threshold : 80(linked with event 1)
Falling threshold : 5(linked with event 2)
When startup enables : risingOrFallingAlarm
This entry will exist : forever
Latest value : 85
Table 1-5 display rmon prialarm command output description
Field Description
PrialarmEntry The entry of the private alarm table
owned by Owner of the entry, user1 in this example
VALID
Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means
invalid. You can use the display rmon command to
view the invalid entry; while with the display
current-configuration and display this commands
you cannot view the corresponding rmon commands.)
Samples type Sampling type, whose value can be absolute or delta.
Sampling interval
Sampling interval, in seconds. The system performs
absolute sample or delta sample to sampling variables
according to the sampling interval.
Rising threshold
Alarm rising threshold. An event is triggered when the
sampled value is greater than or equal to this threshold.
Falling threshold
Alarm falling threshold. An event is triggered when the
sampled value is less than or equal to this threshold.
linked with event Event index associated with the prialarm
When startup enables How can an alarm be triggered
This entry will exist
The lifetime of the entry, which can be forever or span
the specified period
Latest value The count result of the last sample

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English