2-6
display archive configuration
Syntax
display archive configuration
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display archive configuration command to display the information about configuration
rollback.
Examples
# Display the information about configuration rollback.
<Sysname> display archive configuration
Location: flash:/archive
Filename prefix: my_archive
Archive interval in minutes: 120
Maximum number of archive files: 10
Saved archive files:
No. TimeStamp FileName
1 Aug 05 2007 20:24:54 my_archive_1.cfg
2 Aug 05 2007 20:34:54 my_archive_2.cfg
# 3 Aug 05 2007 20:44:54 my_archive_3.cfg
‘#’ indicates the most recent archive file.
Next archive file to be saved: my_archive_4.cfg
Table 2-1 display archive configuration command output description
Field Description
Location Absolute path of the saved configuration files
Archive interval in minutes
Configuration file saving interval, in minutes.
If the automatic saving is disabled, this field is not displayed.
display saved-configuration
Syntax
display saved-configuration [ by-linenum ]
To Next Page
Loading...
Need help?
General