1-8
display poe pse
Syntax
display poe pse
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display poe pse command to display the information of PSE(s).
Examples
# Display the information of the PSE.
<Sysname> display poe pse
PSE ID : 1
PSE Slot No : 1
PSE SubSlot No : 0
PSE Model : LSW124POED
PSE Current Power : 130 W
PSE Average Power : 20 W
PSE Peak Power : 240 W
PSE Max Power : 370 W
PSE Remaining Guaranteed : 130 W
PSE CPLD Version : -
PSE Software Version : 390
PSE Hardware Version : 57603
PSE Legacy Detection : disabled
PSE Utilization-threshold : 80
PSE PD Disconnect Detect Mode : AC
Table 1-5 display poe pse command output description
Field Description
PSE ID ID of the PSE
PSE Slot No Slot number of the PSE
PSE SubSlot No SubSlot number of the PSE
PSE Model Model of the PSE module
PSE Power Enabled PoE is enabled for the PSE
PSE Current Power Current power of the PSE
PSE Average Power Average power of the PSE
To Next Page
Loading...
Need help?
General