Hirschmann RS20 Reference Manual

Content
4
CLI L2P
Release 7.0 05/2011
4.1.9 show bridge vlan-learning 53
4.1.10bridge framesize 54
4.1.11show config-watchdog 54
4.1.12show device-status 55
4.1.13show authentication 56
4.1.14show eventlog 57
4.1.15show interface 58
4.1.16show interface ethernet 60
4.1.17show interface switchport 68
4.1.18show logging 68
4.1.19show mac-addr-table 69
4.1.20show signal-contact 70
4.1.21show slot 71
4.1.22show running-config 72
4.1.23show sysinfo 73
4.1.24show temperature 76
4.2 Debug Commands 77
4.2.1 debug tcpdump help 77
4.2.2 debug tcpdump start cpu 77
4.2.3 debug tcpdump start cpu filter 78
4.2.4 debug tcpdump stop 78
4.2.5 debug tcpdump filter show 79
4.2.6 debug tcpdump filter list 79
4.2.7 debug tcpdump filter delete 80
4.3 Management VLAN Commands 81
4.3.1 network mgmt_vlan 81
4.4 Class of Service (CoS) Commands 82
4.4.1 classofservice dot1p-mapping 83
4.4.2 classofservice ip-dscp-mapping 84
4.4.3 classofservice trust 85
4.4.4 show classofservice dot1p-mapping 86
4.4.5 show classofservice ip-dscp-mapping 87
4.4.6 show classofservice trust 88
4.4.7 vlan port priority all 89
4.4.8 vlan priority 89
4.4.9 dvlan-tunnel ethertype 90
4.4.10mode dvlan-tunnel 91
4.4.11show dvlan-tunnel 92
4.5 Link Aggregation(802.3ad) Commands 93

Hirschmann RS20 Specifications

General

Brand	Hirschmann
Model	RS20
Category	Switch
Language	English