EasyManuals Logo

Hirschmann RS20 Reference Manual

Hirschmann RS20
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #556 background imageLoading...
Page #556 background image
Glossary
CLI L2P
Release
7.0
05/2011
556
R
Real-Time Operating System.
RTOS is a component of the OSAPI
module that abstracts operating
systems with which other systems
can interface.
RFC. Request For Comment.
RMON. Short for remote
monitoring, a network management
protocol that allows network
information to be gathered at a
single workstation. Whereas SNMP
gathers network data from a single
type of Management Information
Base (MIB), RMON 1 defines nine
additional MIBs that provide a much
richer set of data about network
usage. For RMON to work, network
devices, such as hubs and switches,
must be designed to support it. The
newest version of RMON, RMON 2,
provides data about traffic at the
network layer in addition to the
physical layer. This allows
administrators to analyze traffic by
protocol.
RP. Rendezvous Point. Used with
IP Multicast.
RPU. Remote Power Unit.
RTOS. See “Real-Time Operating
System” on page 556.
S
SDL. Synchronous Data Link.
Simple Network Management
Protocol. SNMP is the protocol
governing network management and
the monitoring of network devices
and their functions. It is not
necessarily limited to TCP/IP
networks. The versions have the
following differences:
SNMPv1 (full): Security is based on
community strings.
SNMPsec (historic): Security is based
on parties. Few, if any, vendors
implemented this version of the
protocol, which is now largely
forgotten.
SNMPv2p (historic): For this version,
much work was done to update the
SNMPv1 protocol and the SMIv1,
and not just security. The result was
updated protocol operations, new
protocol operations and data types,
and party-based security from
SNMPsec.
SNMPv2c (experimental): This
version of the protocol is called
community string-based SNMPv2. It
is an update of the protocol
operations and data types of
SNMPv2p, and uses community-
based security from SNMPv1.
SNMPv2u (experimental): This
version of the protocol uses the
protocol operations and data types
of SNMPv2c and security based on
users.
SNMPv2* (experimental): This
version combined the best features

Table of Contents

Other manuals for Hirschmann RS20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hirschmann RS20 and is the answer not in the manual?

Hirschmann RS20 Specifications

General IconGeneral
MountingDIN Rail
Operating Temperature-40°C to +70°C
Protection ClassIP30
Switching TechnologyStore-and-Forward
Product TypeIndustrial Ethernet Switch
Port Details10/100 Mbps Ethernet ports
Switching Capacity3.2 Gbps
MAC Address Table8k
ManagementWeb, SNMP
RedundancyMRP
Ports8 or 16

Related product manuals