Hirschmann RS20 Reference Manual

Content
CLI L2P
Release 7.0 05/2011
7
4.7.5 logging host 162
4.7.6 logging host reconfigure 163
4.7.7 logging host remove 163
4.7.8 logging snmp-requests get operation 163
4.7.9 logging snmp-requests set operation 164
4.7.10logging snmp-requests get severity 164
4.7.11logging snmp-requests set severity 165
4.7.12logging syslog 166
4.7.13logging syslog port 166
4.8 Scripting Commands 167
4.8.1 script apply 167
4.8.2 script delete 168
4.8.3 script list 168
4.8.4 script show 169
4.8.5 script validate 169
4.9 Device Configuration Commands 171
4.9.1 addport 171
4.9.2 adminmode 172
4.9.3 auto-negotiate 173
4.9.4 cable-crossing 174
4.9.5 auto-negotiate all 175
4.9.6 media-module remove 175
4.9.7 deleteport 176
4.9.8 deleteport all 176
4.9.9 macfilter 177
4.9.10macfilter adddest 178
4.9.11macfilter adddest all 179
4.9.12monitor session <session-id> 180
4.9.13monitor session <session-id> mode 181
4.9.14monitor session <session-id> source/destination 182
4.9.15link-aggregation 183
4.9.16link-aggregation adminmode 184
4.9.17link-aggregation linktrap 185
4.9.18link-aggregation name 186
4.9.19rmon-alarm add 187
4.9.20rmon-alarm delete 187
4.9.21rmon-alarm enable 188
4.9.22rmon-alarm disable 188
4.9.23rmon-alarm modify mib-variable 189
4.9.24rmon-alarm modify thresholds 189

Hirschmann RS20 Specifications

General

Brand	Hirschmann
Model	RS20
Category	Switch
Language	English