Hirschmann RS20 Reference Manual

Content
6
CLI L2P
Release 7.0 05/2011
4.6.38show network mgmt-access 127
4.6.39show profinetio 128
4.6.40show serial 129
4.6.41show snmp-access 129
4.6.42show snmpcommunity 130
4.6.43show snmptrap 131
4.6.44show telnet 132
4.6.45show telnetcon 133
4.6.46show trapflags 134
4.6.47snmp-access global 135
4.6.48snmp-access version 136
4.6.49snmp-access version v3-encryption 136
4.6.50snmp-server 137
4.6.51snmp-server community 138
4.6.52snmp-server contact 139
4.6.53snmp-server community ipaddr 140
4.6.54snmp-server community ipmask 141
4.6.55snmp-server community mode 142
4.6.56snmp-server community ro 143
4.6.57snmp-server community rw 143
4.6.58snmp-server location 143
4.6.59snmp-server sysname 144
4.6.60snmp-server enable traps 145
4.6.61snmp-server enable traps chassis 146
4.6.62snmp-server enable traps l2redundancy 147
4.6.63snmp-server enable traps linkmode 148
4.6.64snmp-server enable traps multiusers 149
4.6.65snmp-server enable traps port-sec 150
4.6.66snmp-server enable traps stpmode 151
4.6.67snmptrap 152
4.6.68snmptrap ipaddr 153
4.6.69snmptrap mode 154
4.6.70snmptrap snmpversion 155
4.6.71telnetcon maxsessions 156
4.6.72telnetcon timeout 157
4.7 Syslog Commands 158
4.7.1 logging buffered 158
4.7.2 logging buffered wrap 159
4.7.3 logging cli-command 160
4.7.4 logging console 161

Hirschmann RS20 Specifications

General

Brand	Hirschmann
Model	RS20
Category	Switch
Language	English