Mazda 626 1981 - 7 A-10

Fig. 7A-37
Fig. 7A-38
7A
10. Shift Forks, Rods and Interlock Pins
Use the shift fork rod guide (49 0862 350) and inter-
lock pin
guide (49 0187 451A) to assist in installing
the shift fork rods and interlock pins.
Tightening torque:
Spring cap bolts
Note:
1.0 - 1.5 m-kg
(7 - 11 ft-lb)
When assembling
the shift fork and control end, a
new spring
pin should be installed with the pin slit
positioned in
the direction of the shift rod axis as
shown in
the figure.
11. Main Drive
Shaft Bearing
Install the main drive shaft bearing by using the installer
(49 0500 330).
7A: 10