Mazda 626 1981 - 14-12

Fig.
14-45
Fig.
14-46
Fig
.
14-4
7
f ig
.1
4-48
14
14- 1- 2. Re
pl
ac
ing
Door
Weathe
r
st
rip
Remove the door weatherstrip in the numerical order.
Se
d
an
I.
Pull the weatherstrip from the
retaining
clips, and
remove the weatherstrip without damaging the
rubber
if
the weatherstrip is
to
be used again.
2. Remove the weatherstrip retaining clips from the
door.
3. Inspect the weatherstrip for crack, deformation
and damage.
If
defective, replace it.
4.
Fit
the retaining clips
to
the weatherstrip with a
plier.
5.
Position the weatherstrip
to
the door and fit the
retaining clips into place.
To
install, reverse the removal procedure.
14:
12
,.