Mazda 626 1981 - 14-11

14
Fig.
14-4
1
Fig.14-42
Fig.
14-43
•
Fig.14-44
14 :
11
7. Seat catchs (unhook)
8.
Pull
off
the fasteners
and remove the floor mat.
9.
Hinge
bushs
(both
sides)
10.
Take
out
each seat back
To install, rever
se
the removal procedure.
14-1.
DOOR
14- 1- 1.
Adjusting Door
Adjusting d
oo
r
lock
striker
The striker. can be adjusted laterally and vertically
as
well as fore
and aft.
The striker should not
be
adjusted to
co
rrect door
sag.
1.
Loosen the striker attaching screws and move the
striker as required.
2. Tighten the attaching screws and check the door
fit.