Mazda 626 1981 - 14-31

14
Fig.
14
-
113
Fig.
14
-
114
Rear
brnckct
Fig.
14
-
115
Fig.
14
-
116
14:
31
13. Remove the motor attaching screws and remove
the motor.
14. Remove the rear guide bracket assemble from the
rail ass'y and pull
out
the driving cable.
14- T- 2.
Installing Sliding Sunroof
The installing work
can
be performed more efficiently
with the manual operation handle.
1.
Insert
the driving cable into the tube ass'y.
Note:
a)
Apply
an ample
amount
of
grease
to
the
driving
cable
and insert
the
cable through
the
end
of
the
tube
ass'y.
b)
Apply
an
ample amount
of
grease
on
the
sliding
surfaces
of
cam and guide shoe.
2. Properly adjust the left and right positions
of
driving
cable.
Note:
Insert
the
guide
rail
into its bracket, and insert
the
rearend
of
the
bracket into
the
notch
at
the
rear
of
rail.