Mazda 626 1981 - 09-05

9
0
••
Fig.
9-16
Fig.
9-17
Fig.
9-18
•
Fig.
9-19
9 : 5
9-
0-2
.
Checking Differential
Gears
Check
the
differential side gears
and
pinion gears for
cracks, chipped
teeth
or
any
damage.
9-0-3.
Checking
Bearings
Check
the
differential bearings and pinion bearings
for wear, flaking
or
any
damage .
9-0-4.
Replacing
Pinion Bearing
Outer
Race
1.
Remove the old outer race from the carrier by
using a drift in slots (Fig.
9-17)
provided for this
purpose.
2. Install a new
outer
race
into
the
carrier.
9-0-5.
Checking Collapsible Spacer
Measure
the
length
of
the
collapsible spacer with a
micrometer. The standard length is
57
±
0.15
mm
(2
.244
±
0.006
in).
9-0-6.
Checking Oil Seal
Check
the
oil seal for wear
or
damage.
9-0-7.
Checking Companion Flange
Check
the
companion flange for cracks, worn splines,
or
rough oil seal contacting surface.