Mazda 626 1981 - 14-15

14
Fig.
14-57
Fig.14-58
Fig.
14-59
Fig.14-60
14:
15
d) The in and
out
adjustment of the window
Raise
the
window
to
full
up
position, loosen the lock
nut
and
tum
the
bolt
(
@
,
®)
to
obtain
the
clearan
ce
of
1
2.
5
mm
(0.49
in) between glass and retainer.
Tighten the lock
nut.
Note:
After adjusting, apply
the
putty
to
the
bolt,
nut
and
long hole and paste
the
watershield.
Note:
Make sure
that
the
glass
moves
smoothly.
14-K
. REAR
DOOR
14-K-1.
Rear Door Window Regulator and
Glass
a.
Replaceme
nt
Remove the
door
window regulator and glass in the
numerical order.
1.
Window regulator handle
2. Inner handle
3.
Arm
rest
4.
Door
trim
5.
Door screen
6. Weatherstrip
7. Division
bar
The window glass raised
to
full down position.
8. Window regulator assembly
9. Remove the window
glass
assembly from the
regu-
lator and
tak
e it upward.
To install, reverse the removal procedure.
Note:
Adjust the
regulator
and check the operation
of
the
regulator.