Mazda 626 1981 - 10 A-18

.. 6- 1. 0m·kg
' X' 2"-1>1
Fig.10A-53
Fig. 10A-54
Fig.10A - 55
. Fig. 10A-56
•
lOA
11. Mount the tank assembly on the body housing .
12. Install the suction connector on the housing and
torque the attaching bolts to
0.6 ,.,_, 1.0 m·kg (4.3 -
7.2 ft-lb).
Note:
Clamp the suction connector without twisting the
rubber
part.
13. Lubricate a new 0 ring with power steering fluid
and install it on the pressure connector.
14. Install the outlet connector on the housing and
torque it to
4 ,.,_, 5 m-kg (29 ,.,_, 36 ft·lb).
15 . Confirm that the shaft rotates smoothly without
any catch .
lOA: 18
•.