Fig.
14
-
63
Fig.
14-54
Fig.
14-56
•
14mm
(0.55
in)
14
b. Adjustment
Sedan
Check the window glass operation.
If
the glass
is
loose, adjust
it
by loosening the bo
lt
<CD
).
a)
Horizontal
adjustment
of
the
window
Loosen the regulator guide bolts (
a>,
Q)
)
and make
the horizontal adjustment
of
the glass by moving the
regulator guide
up
or
down.
And tighten the regulator guide bolts.
Note:
Make sure
that
the
glass
moves smoothly.
Hardtop
Remove the weatherstrip {Body side)
a) Horizontal
adjustment
of
the
window
Loosen the regulator guide bolts (
G)
)
and make the
horizontal adjustment
of
the glass
by
moving the
regulator guide
up
or
down.
And tighten the regulator guide bolts.
Make sure
that
the regulator guide (
Q)
)
is parallel with
the standard line.
Note:
Make sure
that
the
glass
moves smoothly.
b)
Vertical adjustment
of
the
window
Raise the window to full
up
positio
n,
adjust the
up
stoppers (
Q)
,
CV
).
Note:
Make sure
that
the
regulator
touches
both
up
stoppers.
The clearance between
th
e
top
of
the
glass and
weatherstrip
retainer
is
10
mm (0.39
in).
c)
The fore and
aft
adjustment
of
the
window
Raise the window
to
full
up
positio
n.
Adjust the following clearance
by
adjusting the bolts
(@,
G))
and the lock nuts
(@,
<2)
).
Note:
Make sure
that
the
glass does
not
play
back and forth.
The clearance
between
the
glass
and weatherstrip
re·
tainer
is
14
mm
(0.55
in).
14:
14
To Next Page
Loading...
