Mazda 626 1981 - 10-08

Fig.10-29
Fig.
10-30
Fig.10-31
Fig.10
-
32
10
13. Fixing bracket attaching bolts
14. Tilt steering shaft assembly
10-8-2
.
Disassembling
Tilt
Steering
Shaft
Disassemble the tilt steering shaft in the numerical
order.
10-8-3
.
Assembling
Tilt
Steering
Shaft
Follow the disassembling procedures
in
the reverse
order.
1.
Tighten the adjust
nut
at
the
specified torque.
Tightening torque:
50
cm·kg
(43
in-lb)
2. Fit the adjust lever and the washer
on
the adjust
nut,
and then, tighten
it
temporarily by the adjust
lever bolt.
Bear in mind that the bolt has left-hand thread.
10:
8