Mazda 626 1981 - 14-24

Fig.
14-91
Hardtop
Fig.
14-92
Sedan
Hardtop
Fig.
14
-
93
•
Fig.
14-94
14
4. Insert the front and rear polyethylene plates
of
the top ceiling to the respective inserting point
of
the body.
5. Attach the polyethylene plates
on
both sides
6.
Installing the fasteners
6.
Bond the double-sided bonding tape
to
the body
flange.
7.
Bond the top ceiling to the body
fl
an
ge
while pulling
on
the inner
to
elirninater wrinkles.
8.
When the
top
ceiling
is
bonded without wrinkles,
cut
off
any remaining
materi~
.
9.
Install
the parts concerned in the rever
se
order
of
removing.
14:
24