PARAMETERS
121
5
5 PARAMETERS
This chapter explains the function setting for use of this product.
Always read this instructions before use.
The following marks are used to indicate the controls as below. (Parameters without
any mark are valid for all control.)
The setting range and the initial value of parameters differ depending on the structure
or functions of the inverter. The following common designations are used for each
type of the inverter models.
Mark Control method Applied motor
V/F control
Three-phase induction motor
Advanced magnetic flux
vector control
Real sensorless vector control
Vector control
PM sensorless vector control IPM motor
Inverter model Common designation
FR-A8[ ]0 Standard model
FR-A8[ ]2 Separated converter type
FR-A8[ ]6 IP55 compatible model
V/F
V/F
Magnetic flux
Magnetic flux
Sensorless
Sensorless
Vector
Vector
PM
PM
To Next Page
Loading...
