Mitsubishi FR-A800 User Manual

(E) Environment setting parameters
256
PARAMETERS
5.7 (E) Environment setting parameters
Purpose Parameter to set
Refer to
page
To set the time Real time clock function
P.E030 to
P. E 03 2
Pr.1006 to
Pr.1008
257
To set a limit for the reset function.
To shut off output if the operation
panel disconnects.
To force deceleration to a stop on the
operation panel.
Reset selection/
disconnected PU
detection/PU stop
selection/Reset limit
P.E100 to
P.E102, P.E107
Pr.75 259
To select the display language of the
parameter unit
PU display language
selection
P.E103 Pr.145 261
To control the buzzer of the
parameter unit and operation panel
PU buzzer control P.E104 Pr.990 261
To adjust the LCD contrast of the
parameter unit
PU contrast adjustment P.E105 Pr.991 261
To turn OFF the operation panel when
not using it for a certain period of
time
Display-off mode P.E106 Pr.1048 262
To use the USB memory USB host reset P.E110 Pr.1049 262
To use the setting dial of the
operation panel like a potentiometer
to set the frequency.
To disable the operation panel.
Operation panel
operation selection
P.E200 Pr.161 263
To change the frequency change
increments which changes when
using the setting dial of the operation
panel
Frequency change
increment amount
setting
P.E201 Pr.295 264
To use the regeneration unit to
increase the motor braking torque
Regenerative brake
selection
P.E300, P.G107 Pr.30, Pr.70 614
To change the overload current rating
specification
Multiple rating setting P.E301 Pr.570 265
To input a voltage between 480 V and
500 V
Input voltage mode
selection
P.E302 Pr.977 266
To prevent parameter rewriting
Parameter write disable
selection
P.E400 Pr.77 267
To restrict parameters with a
password
Password function P.E410, P.E411 Pr.296, Pr.297 269
To use parameters freely Free parameter P.E420, P.E421 Pr.888, Pr.889 271
To change parameter settings for an
IPM motor as a batch
IPM parameter
initialization
P.E430 Pr.998 173
To set multiple parameters as a batch
Automatic parameter
setting
P.E431 Pr.999 271
To display the required parameters
Applicable parameter
display and user group
function
P.E440 to
P. E 44 3
Pr.160,
Pr.172 to Pr.174
275
T
o releas
e the parameter copy
warning (CP)
Parameter copy alarm
release
P.E490 Pr.989 632
To reduce the motor noise and EMI
PWM carrier frequency
changing
P.E600 to
P. E 60 2
Pr.72, Pr.240,
Pr.260
277
To understand the maintenance time
of inverter parts and peripheral
device
Inverter parts life display
P.E700 to
P. E 70 4
Pr.255 to Pr.259 278
Maintenance output
function
P.E710 to
P. E 71 5
Pr.503, Pr.504,
Pr.686 to Pr.689
282
Current average value
monitor signal
P.E720 to
P. E 72 2
Pr.555 to Pr.557 283

Mitsubishi FR-A800 Specifications

General

Brand	Mitsubishi
Model	FR-A800
Category	Inverter
Language	English