Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
2 Ethernet
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
90
Figure 2-13 Failure in forwarding VLAN packets due to RSTP
2.6.2 Preparation for configuration
Networking situation
In a big LAN, multiple devices are concatenated for accessing each other among hosts. They
need to be enabled with STP to avoid loop among them, MAC address learning fault, and
broadcast storm and network down caused by quick copy and transmission of data frame. STP
calculation can block one interface in a broken loop and ensure that there is only one path
from data flow to the destination host, which is also the best path.
Preconditions
N/A
2.6.3 Default configurations of STP
Default configurations of STP are as below.
Function
Default value
Global STP status
Disable
Interface STP status
Enable
STP priority of device
32768
STP priority of interface
128
Path cost of interface
0
Max Age timer
20s
Hello Time timer
2s

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English