Raisecom ISCOM2600G-HI (A) Series - File Management; Managing Bootrom Files

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
1 Basic configurations
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
20
Priority:10
Server:Local
Login :--
Status :offline
Service type:console telnet ssh web lan-access
User State :active
User command control config:
--------------------------------------------------------
Type:allow
First keyword :minrror
Use the newly-created user name user1 and password aaAA123@ to log in to the
ISCOM2600G-HI series switch, and check whether the user privilege is correctly configured.
Login:user1
Password:
Raisecom>enable
Raisecom#config
Raisecom(config)#arp 192.168.0.2 000E.5E12.3456
Set successfully.
1.3 File management
1.3.1 Managing BootROM files
In Boot mode, you can do the following operations.
Operation
Description
t
Update system software to the ISCOM2600G-HI series switch.
m
Update the boot file to the ISCOM2600G-HI series switch.
b
Read system software from the ISCOM2600G-HI series switch, and load
it.
s
Specify the sequence of system software to be loaded upon startup.
e
Clear environment variables.
r
Restart the ISCOM2600G-HI series switch.
p
Configure the BootROM password.
?/h
Show information about system files and help.
Configure the ISCOM2600G-HI series switch as below.