Raisecom ISCOM2600G-HI (A) Series - Reliability; Link aggregation

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10 Security
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
424
Step
Command
Description
5
Raisecom#enable login
{ local-tacacs | tacacs-
local [ server-no-
response ] | tacacs-user }
Configure the authentication mode for a user
to enter privileged EXEC mode to
TACACS+.
6
Raisecom#radius response-
timeout time
Configure the timeout of response by the
TACACS+ authentication server.
10.5.6 Configuring TACACS+ accounting
Configure TACACS+ accounting for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#aaa accounting
login enable
Enable TACACS+ accounting.
2
Raisecom#tacacs-server
[ backup ] { ipv4-address
| ipv6-address } [ acct-
port port-id ]
Assign the IP address and UDP port ID for the
TACACS+ accounting server. Configure the
backup parameter to assign the backup
TACACS+ accounting server.
3
Raisecom#tacacs-server key
string
Raisecom#tacacs [ backup ]
accounting-server encrypt-
key string
Configure the shared plaintext or ciphertext
key to communicate with the TACACS+
accounting server.
4
Raisecom#aaa accounting
fail { offline | online }
Configure the processing policy for
accounting failure.
5
Raisecom#aaa accounting
update period
Configure the period for sending Account-
Update packets. If it is configured to 0, no
Account-Update packet will be sent.
10.5.7 Configuring TACACS+ authorization
Configure TACACS+ authorization for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#aaa command
authorize{ enable | disable }
Enable/Disable TACACS+ command
authorization.
10.5.8 Checking configurations
Use the following commands to check configuration results.