Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
7 QoS
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
308
No.
Command
Description
4
Raisecom#show policy-map [ policy-
map-name ]
Show information about traffic
policy.
5
Raisecom#show policy-map [ policy-
map-name ] [ class class-map-name ]
Show information about the
traffic class in the traffic policy.
6
Raisecom#show mls qos policer
[ policer-name ]
Show information about the
assigned token bucket (rate
limiting and shaping).
7.5.11 Maintenance
Maintain the ISCOM2600G-HI series switch as below.
Command
Description
Raisecom(config)#clear service-policy statistics
interface interface-type interface-number
{ ingress | egress }
Clear statistics on QoS
packets.
7.6 Configuring rate limiting
7.6.1 Preparing for configurations
Scenario
When the network is congested, you want to restrict burst flow on an interface or VLAN to
make packets transmitted at a well-proportioned rate to remove network congestion. In this
case, you need to configure rate limiting.
Prerequisite
N/A
7.6.2 Configuring rate limiting based on interface
Configure rate limiting based on interface for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#interface
interface-type interface-number
Enter interface configuration
mode.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English