Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10 Security
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
397
10 Security
This chapter describes basic principles and configuration procedures for security, and
provides related configuration examples, including the following sections.

ACL

Port security MAC

Dynamic ARP inspection

RADIUS

TACACS+

Storm control

802.1x

IP Source Guard

PPPoE+

Configuring CPU protection

Configuring anti-ARP attack
10.1 ACL
10.1.1 Introduction
Access Control List (ACL) is a set of ordered rules, which can control the ISCOM2600G-HI
series switch to receive or refuse some data packets.
You need to configure rules on the network to prevent illegal packets from affecting network
performance and determine the packets allowed to pass. These rules are defined by ACL.
ACL is a series of rule composed of permit | deny sentences. The rules are described
according to source address, destination address, and port ID of data packets. The
ISCOM2600G-HI series switch judges receiving or rejecting packets according to the rules.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English