Raisecom ISCOM2600G-HI (A) Series - Checking Configurations; Maintenance

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10 Security
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
436
Step
Command
Description
4
Raisecom(config-
gigaethernet1/1/port)#dot1x
timer quiet-period second
Configure the time of the quiet
timer.
5
Raisecom(config-
gigaethernet1/1/port)#dot1x
timer supp-timeout supp-timeout
Configure the time of the supplicant
authorization timeout timer.
6
Raisecom(config-
gigaethernet1/1/port)#dot1x
timer server-timeout server-
timeout
Configure the time of the
authentication server timeout timer.
7
Raisecom(config-
gigaethernet1/1/port)#dot1x
timer keepalive-period second
Configure the period for
retransmitting KeepAlive packets by
interface 802.1x.
10.7.7 Checking configurations
Use the following commands to check configuration results.
No.
Command
Description
1
Raisecom#show dot1x interface-
type interface-number
Show 802.1x configurations on the
interface.
2
Raisecom#show dot1x interface-
type interface-number statistics
Show 802.1x statistics on the
interface.
3
Raisecom#show dot1x interface-
type interface-number user
Show user information of 802.1x
authentication on the interface.
4
Raisecom#show dot1x free-ip
Configure the IP address segment
available for 802.1x terminal users
who fail to be authenticated or exit
authentication.
10.7.8 Maintenance
Maintain the ISCOM2600G-HI series switch as below.
Command
Description
Raisecom(config)#clear dot1x interface-
type interface-number statistics
Clear interface 802.1x statistics.