Raisecom ISCOM2600G-HI (A) Series - Configuring Ipv4 Adress of VLAN Interface; Configuring Ipv6 Address of VLAN Interface; Configuring Attributes of Management VLAN

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
5 IP services
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
208
Function
Default value
Management VLAN inner TPID
0x8100
Management VLAN inner VLAN
1
Management VLAN CoS
0
5.1.4 Configuring IPv4 adress of VLAN interface
Configure the IPv4 address of the VLAN interface for the ISCOM2600G-HI series switch as
below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#inter
face vlan vlan-id
Enter VLAN interface configuration mode.
3
Raisecom(config-
vlan1)#ip address ip-
address [ ip-mask ]
[ sub ]
Configure the IP address of the VLAN interface.
Use the no ip address ip-address command to
delete configuration of the IP address.
5.1.5 Configuring IPv6 address of VLAN interface
Configure the IPv6 address of the VLAN interface for the ISCOM2600G-HI series switch as
below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#interface vlan
vlan-id
Enter Layer 3 interface
configuration mode.
3
Raisecom(config-vlan1)#ipv6 address
ipv6-address link-local
Raisecom(config-vlan1)#ipv6 address
ipv6-address/prefix-length [ eui-
64 ]
Configure the IPv6 address of
the VLAN interface.
5.1.6 Configuring attributes of management VLAN
Configure attributes of the management VLAN for the Gazelle S1508i-PWR as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#interface vlan
vlan-id
Enter VLAN interface
configuration mode.