Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
12 System management
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
527
12.7.2 Preparing for configurations
Scenario
Hardware environment monitoring provides environment monitoring for the devices, through
which you can monitor the fault. When device operation environment is abnormal, this
function will record hardware environment monitoring alarm list, generate system log, or send
Trap and other alarms to notify taking corresponding measures and preventing fault.
Prerequisite
Hardware environment monitoring alarm output:

In Syslog output mode: alarms will be generated into system logs. To send alarm to the
system log host, configure system log host IP address for the device.

In Trap output mode: configure the management IP address of the device.
12.7.3 Default configurations of hardware environment monitoring
Default configurations of hardware environment monitoring are as below.
Function
Default value
Global hardware environment monitoring alarm Syslog output
Disable
Global hardware environment monitoring alarm Trap output
Disable
Power down event alarm

Enable Trap output.

Enable Syslog system
log output.
Temperature alarm output
High temperature alarm threshold
102ºC
Low temperature alarm threshold
-40ºC
12.7.4 Enabling global hardware environment monitoring
Enable global hardware environment monitoring for the ISCOM2600G-HI series switch as
below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#lo
gging alarm
(Optional) enable global hardware environment
monitoring alarm Syslog output.
3
Raisecom(config)#sn
mp-server alarm-
trap enable
(Optional) enable global hardware environment
monitoring alarm Trap.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English