Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
12 System management
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
533
12.10 Memory monitoring
12.10.1 Preparing for configurations
Scenario
Memory monitoring enables you to learn the memory utilization in real time, and provides
memory utilization threshold alarms, thus facilitating you to locate and clear potential risks
and help network administrator to locate faults.
Prerequisite
To output memory utilization threshold alarms as Trap, configure the IP address of the target
host, namely, the IP address of the NMS server.
12.10.2 Configuring memory monitoring
Configure memory monitoring for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#memory
threshold recovering
recovering-threshold-value
rising rising-threshold-value
Configure the rising threshold and
recovering threshold for memory
utilization alarms.
3
Raisecom(config)#memory
interval Observation-
interval-value
Configure the interval for sampling
memory alarms.
12.10.3 Checking configurations
Use the following commands to check configuration results.
No.
Command
Description
1
Raisecom#show
memory [ module
{ value |
bufferpool |
diff }
Show information about the system memory, including
the alarm enabling status, rising threshold, recovering
threshold, sampling interval, total memory, used
memory, idle memory, memory utilization, and memory
used by each module, and memory change.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English