Raisecom ISCOM2600G-HI (A) Series - Configuring congestion management

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
6 DHCP
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
268
6.3.6 Configuring DHCPv6 Snooping
Configure DHCPv6 Snooping for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#ipv6 dhcp
snooping
Enable global DHCPv6 Snooping.
3
Raisecom(config)#interface
interface-type interface-number
Enter physical layer interface
configuration mode.
4
Raisecom(config-
gigaethernet1/1/port)#ipv6 dhcp
snooping
(Optional) enable interface
DHCPv6 Snooping.
5
Raisecom(config-
gigaethernet1/1/port)#ipv6 dhcp
snooping trust
Configure the trusted interface of
DHCPv6 Snooping.
6
Raisecom(config-
gigaethernet1/1/port)#ipv6 dhcp
snooping vlan vlan-id
Enable IPv6 DHCP Snooping on
the specified interface and in the
specified VLAN.
7
Raisecom(config-
gigaethernet1/1/port)#ipv6 dhcp
snooping binding max number
Configure the maximum number
of entries in the DHCPv6
Snooping binding table.
8
Raisecom(config-
gigaethernet1/1/port)#exit
Raisecom(config)#ipv6 dhcp
snooping option number
(Optional) configure DHCPv6
Snooping to support user-defined
Options.
9
Raisecom(config)#ipv6 dhcp
snooping option interface-id
(Optional) configure DHCP
Snooping to support Option 18.
6.3.7 Checking configurations
Use the following commands to check configuration results.
Step
Command
Description
1
Raisecom#show ip dhcp
snooping
Show configurations of DHCP Snooping.
2
Raisecom#show ip dhcp
snooping binding
Show configurations of the DHCP
Snooping binding table.
3
Raisecom#show ipv6 dhcp
snooping
Show configurations of DHCPv6
Snooping.
4
Raisecom#show ipv6 dhcp
snooping binding
Show configurations of the DHCPv6
Snooping binding table.
5
Raisecom#show ip dhcp
snooping autosave
Show auto-saving status of the DHCP
Snooping binding table.