Raisecom ISCOM2600G-HI (A) Series - Ethernet; MAC address table

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
1 Basic configurations
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
19
Figure 1-5 User management networking
Configuration steps
Step 1 Configure the user login authentication mode.
Raisecom#user login local-user
Step 2 Create a local user user1.
Raisecom#user name user1 password simple aaAA123@
Step 3 Configure the user privilege.
Raisecom#user user1 privilege 10
Step 4 Configure the service type of the user.
Raisecom#user user1 service-type telnet
Checking results
Use the show user table detail command to show configurations of local users.
Raisecom#show user table detail
User Login :local-user
Enable Login:local-user
Username:raisecom
Priority:15
Server:Local
Login :console
Status :online
Service type:console telnet ssh web lan-access
User State :active
Username:user1