Raisecom ISCOM2600G-HI (A) Series - Maintenance; Example for Configuring LLDP

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
12 System management
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
506
No.
Command
Description
3
Raisecom#show lldp remote
[ interface-type interface-
number ] [ detail ]
Show information about the LLDP
neighbor.
4
Raisecom#show lldp statistic
[ interface-type interface-
number ]
Show statistics about LLDP packets.
5
Raisecom#show lldp tlv-select
[ interface-type interface-
number ]
Show information about the optional
TLV sent by the interface.
12.3.10 Maintenance
Maintain the ISCOM2600G-HI series switch as below.
Command
Description
Raisecom(config)#clear lldp statistic
interface-type interface-number
Clear LLDP statistics.
Raisecom(config)#clear lldp remote-table
[ interface-type interface-number ]
Clear LLDP neighbor
information.
Raisecom(config)#clear lldp global
statistic
Clear global LLDP statistics.
12.3.11 Example for configuring LLDP
Networking requirements
As shown in Figure 12-9, the Switch is connected to the NView NNM system; enable LLDP
between Switch A and Switch B, query Layer 2 link change through the NView NNM system.
The neighbor aging, new neighbor and neighbor information changes will be reported as
LLDP alarms to the NView NNM system.