Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10 Security
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
446
Prerequisite
N/A
10.9.3 Default configurations of PPPoE+
Default configurations of I PPPoE+ are as below.
Function
Default value
Global PPPoE
Disable
Interface PPPoE
Disable
Padding mode of Circuit ID
Switch
Circuit ID information
Interface ID/VLAN ID/attached string
Attached string of Circuit ID
hostname
Padded MAC address of Remote ID
MAC address of the switch
Padding mode of Remote ID
Binary
Interface trusted status
Untrusted
Tag overriding
Disable
By default, PPPoE packets are forwarded without being attached with any
information.
10.9.4 Configuring basic functions of PPPoE+
PPPoE+ is used to process PADI and PADR packets. It is designed for the PPPoE
client. Generally, PPPoE+ is only enabled on interfaces that are connected to the
PPPoE client. Trusted interfaces are interfaces through which the switch is connected
to the PPPoE server. PPPoE+ and trusted interface are exclusive; in other words, an
interface enabled with PPPoE+ cannot be configured as a trusted interface.
Enabling PPPoE+
After global PPPoE+ and interface PPPoE+ is enabled, PPPoE authentication packets sent to
the interface will be attached with user information and then are forwarded to the trusted
interface.
Enable PPPoE+ for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English