Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
8 Multicast
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
346
8.6.3 Default configurations of IGMP filtering
Default configurations of IGMP filtering are as below.
Function
Default value
Global IGMP filtering
Disable
IGMP filtering profile Profile
N/A
IGMP filtering profile action
Refuse
IGMP filtering under interface
No maximum group limit, the largest group
action is drop, no application filtering profile
IGMP filtering under interface+VLAN
No maximum group limit, the largest group
action is drop, no application filtering profile
8.6.4 Enabling global IGMP filtering
Enable global IGMP filtering for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode
2
Raisecom(config)#igmp filter
Enable global IGMP filtering
When configuring IGMP filtering profile or the maximum group number, use the igmp
filter command to enable global IGMP filtering.
8.6.5 Configuring IGMP filtering profile
IGMP filtering profile can be used to interface or interface+VLAN.
Configure IGMP filtering profile for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#igmp filter
profile profile-number
Create IGMP Profile and enter
Profile configuration mode.
3
Raisecom(config-igmp-
profile)#{ permit | deny }
Configure IGMP Profile action.
4
Raisecom(config-igmp-
profile)#range range-id start-ip-
address [ end-ip-address ]
Configure to control IP multicast
address access and range.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English