Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Raisecom(config-acl-ipv6)#rule
[
rule-id
] { deny | permit }
{
protocol-id
| ipv6 | icmpv6 }
{
source-ipv6-address/prefix
| any }
{
destination- ipv6-address/prefix
|
any } [ dscp
dscp-value
]
[ fragment ] [flow-label
flow label-
value
] [ time-range
time-range-
name
]
Raisecom(config-acl-ipv6)#rule
[
rule-id
] { deny | permit } { tcp |
udp } {
source-ipv6-address/prefix
source-ip-mask
| any } {
destination-
ipv6-address/prefix
| any }
[
destination-port
] [ ack
ack-
value
] [ dscp
dscp-value
] [ fin
fin-value
] [ fragment ] [flow-label
flow label-value
] [ psh
psh-valu
e ]
[ rst
rst-value
] [ syn
syn-value
]
[ urg
urg-value
] [ time-range
time-
range-name
]
(Optional) configure the
matching rule for MAP ACL.
Raisecom(config-acl-advanced)#rule
[
rule-id
] { deny | permit }
{
source-mac-address source-mac-mask
| any } {
destination-mac-address
destination-mac-mask
| any } [ svlan
svlanid
] [ cos
cos-value
] [ cvlan
cvlanid
] [ inner-cos
inner-cos
]
{
source-ip-address source-ip-mask
|
any } {
destination-ip-address
destination-ip-mask
| any }[ dscp
dscp-value
] [ ttl
ttl-value
]
[ fragment ] [ precedence
precedence-
value
] [ tos
tos-value
] [ time-
range
time-range-name
]
Raisecom(config-acl-advanced)#exit
(Optional) configure the
matching rule for advanced
ACL.
Raisecom(config)#interface vlan
vlan-
id
Enter VLAN interface mode.
Raisecom(config-vlan1)#local-access
access-list
acl-number
(Optional) configure the SNMP
ACL IP.
10.1.4 Configuring ACL period
Configure the ACL period for the ISCOM2600G-HI series switch as below.
Enter global
configuration mode.
To Next Page
Loading...
