Raisecom ISCOM2600G-HI (A) Series - Configuring Hierarchical Bandwidth Guarantee

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
7 QoS
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
312
Step
Command
Description
1
Raisecom#config
Enter global
configuration mode.
2
Raisecom(config)#bandwidth-profile bwp
profile-id cir cir cbs cbs [ eir eir ebs
ebs ] [ color-aware ]
Create a bandwidth
guarantee profile.
3
Raisecom(config)#interface interface-type
interface-number
Raisecom(config-
gigaethernet1/1/port)#bandwidth { ingress |
egress } vlan vlan-id coslist cos-value-list
bwp-profile-id
Apply the bandwidth
guarantee profile on
the
interface+VLAN+CoS.
If a bandwidth guarantee profile is used by other profiles or applied, it cannot be
deleted.
7.7.5 Configuring hierarchical bandwidth guarantee
Creating hierarchical CoS bandwidth guarantee
Create a hierarchical CoS bandwidth guarantee for the ISCOM2600G-HI series switch as
below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#bandwidth-profile
profile-id cir cir cbs cbs [ eir
eir ebs ebs ] [ color-aware ]
Create a bandwidth guarantee
profile.
3
Raisecom(config)#hierarchy-cos
bandwidth-profile hc-profile-id
Create a hierarchical CoS profile,
and enter HCoS configuration
mode.
4
Raisecom(config-hcos)#bandwidth
coslist cos-list bwp-profile-id
Raisecom(config-hcos)#exit
Configure the hierarchical CoS
profile.
5
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#bandwidth
{ ingress | egress } vlan vlan-id
bwp-profile-id hierarchy-cos hc-
profile-id
Apply the hierarchical CoS profile
on the ingress interface+VLAN.