Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Raisecom(config)#snmp-server view
view
-
name
oid-tree
[
mask
] { excluded
| included }
(Optional) create SNMP
view and configure MIB
variable range.
Raisecom(config)#snmp-server user
user
-
name
[ remote
engine-id
]
authentication { md5 | sha }
authpassword
[privkey
privkeypassword
]
Create users and configure
authentication modes.
Raisecom(config)#snmp-server user
user
-
name
[ remote
engine-id
] authkey
{ md5 | sha }
keyword
[privkey
privkeypassword
]
(Optional) modify the
authentication key and the
encryption key.
Raisecom(config)#snmp-server access
group-name
[ read
view-name
] [ write
view-name
] [ notify
view-name
]
[ context
context-name
{ exact |
prefix } ] usm { authnopriv | authpriv
| noauthnopriv }
Create and configure the
SNMPv3 access group.
Raisecom(config)#snmp-server group
group
-
name
user
user-name
usm
Configure the mapping
between users and the access
group.
12.1.6 Configuring IP address authentication by SNMP server
Configure IP address authentication by SNMP server for the ISCOM2600G-HI series switch
as below.
Enter global configuration mode.
Raisecom(config)#snmp-
server server-auth
{ enable | disable }
Enable or disable IP address authentication
by the SNMP server.
Raisecom(config)#snmp-
server server-auth
ip-
address
Configure the IP address of the SNMP
server for authentication.
12.1.7 Configuring other information about SNMP
Other information about SNMP includes:
Logo and contact method of the administrator, which is used to identify and contact the
administrator
Physical location of the device: describes where the device is located
SNMPv1, SNMPv2c, and SNMPv3 support configuring this information.
Configure other information about SNMP for the ISCOM2600G-HI series switch as below.
To Next Page
Loading...
