Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
12 System management
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
494
Raisecom#show snmp access
…
Index: 1
Group: guestgroup
Security Model: usm
Security Level: authnopriv
Context Prefix: --
Context Match: exact
Read View: mib2
Write View: --
Notify View: internet
…
Use the show snmp group command to show mapping between users and access groups.
Raisecom#show snmp group
Index GroupName UserName SecModel
-----------------------------------------------------------
0 initialnone none usm
1 initial md5priv usm
2 initial shapriv usm
3 initial md5nopriv usm
4 initial shanopriv usm
5 guestgroup guestuser1 usm
Use the show snmp host command to show configurations of the Trap target host.
Raisecom#show snmp host
Index: 0
IP family: IPv4
IP address: 20.0.0.221
Port: 162
User Name: guestuser1
SNMP Version: v3
Security Level: authnopriv
TagList: bridge config interface rmon snmp ospf
12.2 RMON
12.2.1 Introduction
Remote Network Monitoring (RMON) is a standard stipulated by Internet Engineering Task
Force (IETF) for network data monitoring through different network Agents and NMS.
RMON is achieved based on SNMP architecture, including the NView NNM system and the
Agent running on network devices. On the foundation of SNMP, increase the subnet flow,

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English