Raisecom ISCOM2600G-HI (A) Series - Checking Configurations; Example for Configuring RADIUS

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10 Security
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
420
Step
Command
Description
6
Raisecom#aaa accounting
update minute
Configure the period for sending Account-
Update packets. If it is configured to 0, no
Account-Update packet will be sent.
The RADIUS accounting server can
record access time and operation for
each user through Accounting-Start
packets, Accounting-Update packets,
and Accounting-End packets.
10.4.6 Checking configurations
Use the following commands to check configuration results.
No.
Command
Description
1
Raisecom#show radius-
server
Show configurations of the RADIUS server.
2
Raisecom#show aaa
Show configurations of RADIUS accounting.
10.4.7 Example for configuring RADIUS
Networking requirements
As shown in Figure 10-4, to control a user from accessing the Switch, you need to configure
RADIUS authentication and accounting on Switch A to authenticate login users on Switch A
and record the operations. The period for sending Account-Update packets is 2 minutes. The
user will be logged out if accounting fails.