Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
3 ISF
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
188
Figure 3-18 Networking topology after adding Switch A to ISF
Configuration thought

Configure the member ID, member priority, and ISF interface of these four member
devices.

Configure ISF on them. Connect them according to the previous networking topology.

Switch them to ISF mode.
Configuration steps
Step 1 Configure Switch A.
1. Configure the member ID of Switch A to 1 and member priority to 12.
Raisecom#config
Raisecom(config)#isf renumber 1
Raisecom(config)#isf priority 12
Raisecom(config)#interface tengigabitethernet 1/1/25
Raisecom(config-tengigabitethernet1/1/25)#exit
Raisecom(config)#interface tengigabitethernet 1/1/27
Raisecom(config-tengigabitethernet1/1/27)#exit
Raisecom(config)#interface isf-port 1/1/1
Raisecom(config-isf-port1/1/1)#isf port-group tengigabitethernet 1/1/25

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English