Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
10 Security
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
434
Function
Default value
Authentication method
Portbased
Re-authentication
Disable
802.1x re-authentication timer
3600s
802.1x quiet timer
60s
Transmission timeout timer
30s
Supplicant authorization timeout timer
30s
10.7.4 Configuring basic functions of 802.1x

802.1x and STP are exclusive on the same interface. You cannot enable them
concurrently.

Only one user authentication request is processed on an interface at a time.
Configure basic functions of 802.1x for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#dot1x enable
Enable global 802.1x.
3
Raisecom(config)#dot1x
authentication-method { chap |
pap | eap }
Configure global authentication
mode.
4
Raisecom(config)#dot1x auth-mode
{ radius | local | tacacs+ }
Configure the mode of 802.1x
authentication.
5
Raisecom(config)#dot1x free-ip
ip-address [ ip-mask | mask-
lenth ]
Configure the IP address segment
available for 802.1x terminal users
who fail to be authenticated or exit
authentication.
6
Raisecom(config)#interface
interface-type interface-number
Enter physical layer interface
configuration mode.
7
Raisecom(config-
gigaethernet1/1/port)#dot1x
enable
Enable interface 802.1x.
8
Raisecom(config-
gigaethernet1/1/port)#dot1x
auth-control { auto |
authorized-force | unauthorized-
force }
Configure access control mode on
the interface.
9
Raisecom(config-
gigaethernet1/1/port)#dot1x
auth-method { portbased |
macbased }
Configure access control mode of
802.1x authentication on the
interface.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English