Raisecom ISCOM2600G-HI (A) Series - Default Configurations of IGMP MVR; Configuring IGMP MVR; Figure 8-8 IGMP MVR Networking

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
8 Multicast
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
341
Figure 8-8 IGMP MVR networking
Prerequisite

Disable multicast VLAN copy.

Create VLANs.

Add related interfaces to the VLANs.
8.5.3 Default configurations of IGMP MVR
Default configurations of MVR are as below.
Function
Default value
Global IGMP MVR status
Disable
Interface IGMP MVR status
Disable
Multicast VLAN and group address set
N/A
8.5.4 Configuring IGMP MVR
Configure IGMP MVR for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#igmp mvr
Enable global IGMP MVR.