Raisecom ISCOM2600G-HI (A) Series - TACACS+

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
9 OAM
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
391
Step
Command
Description
6
Raisecom(config)#sla oper-
num availability-threshold
[ sd | ds ] threshold
Configure the threshold in the SLA
availability test.
7
Raisecom(config)#sla oper-
num { availability-trap |
availabilitychange-trap }
[ ds | sd ] enable
Enable SLA availability threshold alarm or
SLA availability threshold change alarm.
By default, they are disabled.
9.4.10 Enabling alarms
Enable alarms for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#sla alarm
availabilitychange enable
(Optional) enable availability
status change alarm.
3
Raisecom(config)#sla oper-num loss-
pkt-trap { current | average }
enable
Enable threshold crossing alarm
during operations.
Raisecom(config)#sla oper-num
{ delay-trap | jitter-trap }
{ current | average } [ ds | sd |
two-way ] enable
4
Raisecom(config)#sla alarm threshold
enable
(Optional) enable threshold
alarm.
9.4.11 Checking configurations
Use the following commands to check configuration results.
No.
Command
Description
1
Raisecom#show sla { all | oper-
num } configuration
Show SLA configurations.
2
Raisecom#show sla { all | oper-
num } result
Show information in the current SLA
operation test period.
3
Raisecom#show sla oper-num
threshold
Show the SLA operation threshold.
4
Raisecom#show sla oper-num
latest statistic
Show statistics on the SLA operation
in the last complete scheduling.
5
Raisecom#show sla maintanence
Show the maintenance window status
of the device.