EasyManua.ls Logo

Raisecom ISCOM2600G-HI (A) Series - Configure DHCP Snooping to Support Option 82

Raisecom ISCOM2600G-HI (A) Series
581 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
6 DHCP
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
267
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#ip dhcp snooping
Enable global DHCP Snooping.
3
Raisecom(config)#interface
interface-type interface-number
Enter physical layer interface
configuration mode or aggregation
group configuration mode.
4
Raisecom(config-
gigaethernet1/1/port)#ip dhcp
snooping
(Optional) enable interface DHCP
Snooping. The device supports this
configuration on the QinQ interface.
5
Raisecom(config-
gigaethernet1/1/port)#ip dhcp
snooping trust
Configure the trusted interface of
DHCP Snooping.
6
Raisecom(config-
gigaethernet1/1/port)#ip dhcp
snooping binding max
number
Configure the maximum number of
entries in the DHCP Snooping
binding table.
7
Raisecom(config-
gigaethernet1/1/port)#ip dhcp
snooping outer
vlan-id
inner
vlan-list
(Optional) enable DHCP Snooping
based on interface or double VLAN
Tags.
8
Raisecom(config)#ip dhcp snooping
option client-id
(Optional) configure DHCP
Snooping to support Option 61
field.
9
Raisecom(config)#ip dhcp snooping
autosave enable
(Optional) enable auto-saving of the
DHCP Snooping binding table.
10
Raisecom(config)#ip dhcp snooping
autosave write-interval
tim
e
(Optional) configure the interval for
automatically saving the DHCP
Snooping binding table.
6.3.5 Configure DHCP Snooping to support Option 82
Configure DHCP Snooping to support Option 82 for the ISCOM2600G-HI series switch as
below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#ip dhcp snooping
information option
Configure global DHCP Snooping
to support Option 82.
3
Raisecom(config)#interface
interface-type
interface-number
Enter physical layer interface
configuration mode.
4
Raisecom(config-
gigaethernet1/1/port)#ip dhcp
snooping information option vlan-
list
vlan-list
(Optional) configure the lists of
VLANs that support Option 82
through interface DHCP Snooping.

Table of Contents

Related product manuals