Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
6 DHCP
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
283
Function
Default value
Interface DHCPv6 Relay
Disable
6.6.4 Configuring global DHCP Relay
Configure global DHCP Relay for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#ip dhcp relay
Enable global DHCP Relay.
6.6.5 Configuring DHCP Relay on VLAN interface
Configure DHCP Relay on the VLAN interface for the ISCOM2600G-HI series switch as
below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#interface vlan
vlan-id
Enter VLAN interface configuration
mode.
3
Raisecom(config-vlan1)#ip dhcp
relay
Enable DHCP Relay on the VLAN
interface.
4
Raisecom(config-vlan1)#ip dhcp
relay target-ip ip-address
Configure the destination IP address
for forwarding packets.
6.6.6 Configuring global DHCPv6 Relay
Configure global DHCPv6 Relay for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#ipv6 dhcp relay
Enable global DHCPv6 Relay.
3
Raisecom(config)#ipv6 dhcp relay
option interface-id
Enable DHCPv6 Relay to support
Option 18.
4
Raisecom(config)#ipv6 dhcp relay
option remote-id
Enable DHCPv6 Relay to support
Option 37.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English