Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
11 Reliability
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
460
Step
Command
Description
4
Raisecom(config-port-
channel1)#master-port
interface-type interface-
number
Configure the active interface of the
LAG.
5
Raisecom(config-port-
channel1)#restore-mode
{ non-revertive | revertive
[ restore-delay second ] }
Configure the restoration mode and
wait-to-restore time of the LAG.
By default, the restoration mode is non-
revertive.
6
Raisecom(config-port-
channel1)#exit
Return to global configuration mode.
7
Raisecom(config)#interface
interface-type interface-
number
Enter physical layer interface
configuration mode.
8
Raisecom(config-
gigaethernet1/1/port)#port-
channel channel-number
Add member interfaces to the LAG.
9
Raisecom(config-
gigaethernet1/1/port)#exit
Return to global configuration mode.
11.1.6 Checking configurations
Use the following commands to check configuration results.
No.
Command
Description
1
Raisecom#show
lacp internal
Show local system LACP interface status, flag, interface
priority, administration key, operation key, and interface
status machine status.
2
Raisecom#show
lacp neighbor
Show information about LACP neighbors, including tag,
interface priority, device ID, Age, operation key value,
interface ID, and interface status machine status.
3
Raisecom#show
lacp
statistics
Show statistics about interface LACP, including the total
number of received/sent LACP packets, the number of
received/sent Marker packets, the number of received/sent
Marker Response packets, and the number of errored
Marker Response packets,
4
Raisecom#show
lacp sys-id
Show global LACP status of the local system, device ID,
including system LACP priority and system MAC address.
5
Raisecom#show
port-channel
Show link aggregation status of the current system, load
balancing mode of link aggregation, all LAG member
interfaces, and active member interfaces.
The active member interface refers to the one
whose interface status is Up.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English