Raisecom ISCOM2600G-HI (A) Series User Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
8 Multicast
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
331

Create VLANs.

Add related interfaces to the VLANs.
8.3.3 Default configurations of IGMP Snooping
Default configurations of IGMP Snooping are as below.
Function
Default value
Global IGMP Snooping status
Disable
VLAN IGMP Snooping status
Disable
IGMP robustness
2
8.3.4 Configuring IGMP Snooping
Configure IGMP Snooping for the ISCOM2600G-HI series switch as below.
Step
Command
Description
1
Raisecom#config
Enter global configuration mode.
2
Raisecom(config)#igmp snooping
Enable global IGMP Snooping.
3
Raisecom(config)#igmp member time-
out { seconds | infinite }
(Optional) configure the aging
time of IGMP members.
4
Raisecom(config)#igmp snooping vlan
vlan-list
(Optional) enable IGMP
Snooping on all VLANs.
5
Raisecom(config)#vlan vlan-id
Raisecom(config-vlan)#igmp snooping
static ip-address [ interface-type
interface-number ]
(Optional) configure static
members of IGMP Snooping in
VLAN mode.
6
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#igmp snooping
host-join group-address vlan vlan-id
Configure the host joining
function.

IGMP Snooping and IGMP MVR cannot be enabled concurrently in the same
multicast VLAN. Otherwise, the configuration will fail.

IGMP Snooping and multicast VLAN copy cannot be enabled concurrently in the
same multicast VLAN. Otherwise, the configuration will fail.
8.3.5 Checking configurations
Use the following commands to check configuration results.

Raisecom ISCOM2600G-HI (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G-HI (A) Series
Category	Switch
Language	English